Question 1

How do you fix peeling or flaking paint before repainting, and what causes it in the first place?

Accepted Answer

Peeling or flaking paint happens when moisture, sun, or poor surface prep breaks the bond between paint and surface. Fix it by scraping all loose chips, sanding smooth, cleaning off dust, repairing damage, priming bare spots with a bonding or stain-blocking primer, then applying fresh, high-quality paint.

Hot summers, sudden rainstorms, and high humidity in Northeast Georgia put paint under stress. Add in harsh UV rays, trapped indoor moisture, or cheap paint applied over chalk, mildew, or glossy surfaces, and the coating will soon blister, peel, or flake. Skipping primer or painting before wood is dry are the most common culprits.

The cure starts with thorough surface prep. Our crew uses hand scrapers or pressure washing to remove every loose chip. When we work on older homes, our EPA Lead-Safe certified painters follow proper containment to keep your family safe.

Next, we wipe away dust, let the surface dry, and spot-prime bare wood or metal with a high-bond or stain-blocking primer. On chalky exteriors we may apply a full bonding primer for extra grip. Finally, we brush or spray premium exterior house paint matched to North Georgia’s climate for long-lasting color and protection.

Want paint that stays put? Get a free painting estimate, and BCI Painting backs the job with a two-year workmanship and material warranty.

Question 2

What specific prep do you include (washing, scraping, sanding, patching, caulking, priming)?

Accepted Answer

Our Northeast GA painting company’s prep checklist includes pressure-washing or hand-washing surfaces, scraping and sanding loose or glossy paint, patching holes or rot, caulking gaps and seams, and spot- or full-priming bare or stained areas. This careful prep ensures your new finish looks sharp and lasts.

Your trusted painters at BCI prep every surface like pros before any color goes on. First, we clean the surface (pressure washing outside or gentle hand washing inside) to remove mildew, chalk, and grease. Then we scrape every loose chip and sand the edges until the surface feels smooth to the touch. Glossy areas get a quick scuff so new paint can adhere evenly.

Next, we patch defects. We fill nail holes, dents, and small drywall seams with spackle, repair rotten wood with epoxy, and replace boards when needed. After sanding the patches flush, we run a fresh bead of paintable, mildew-resistant caulk along trim, windows, doors, and siding joints. This seals out water, pests, and drafts and leaves cleaner cut-lines.

Finally, we prime bare wood, metal, and any patched or stained spots with the right bonding or stain-blocking primer. On trouble substrates we apply a full coat, giving the finish coats a uniform base and extra grip. Because we are EPA Lead-Safe certified and fully insured, we follow strict safety steps when old coatings may contain lead.

This detailed prep is why our interior painting, exterior house painting Athens, and commercial painting Northeast GA jobs last. It lets us back your project with a two-year workmanship and material warranty. Ready to get started? Request your free painting estimate today and see why homeowners call us the best painting contractor in Northeast Georgia.

How do you fix peeling or flaking paint before repainting, and what causes it in the first place?

What specific prep do you include (washing, scraping, sanding, patching, caulking, priming)?

Free Estimates

Get your free quote!